With more than 5 decades of experience, Banco engineers have mastered the science of engine sealing systems. No two applications are exactly the same and therefore their solutions are also not the same. Our designers are trained to critically evaluate engine design, its expected usage, and the configuration of mating parts, the number of bolts, bolt torque and many other critical input data.
Banco’s modern R&D center at Ankhi is DSIR certified. With more than 4500 square feet of the construction area, this modern centre is well equipped with advanced design simulation and test capabilities to support our engineers by leveraging multiple material and manufacturing process options, our designers offer customized solutions that deliver long life, maximum efficiency and reduced total cost of ownership.
At Banco, bespoke engineering is our design philosophy that stands for a thorough understanding of every application need that offers contemporary engineering solution to best fit the customer’s product performance expectations. Our engineers live this philosophy every day!
The automotive industry is currently going through a highly dynamic phase. Growing needs for multiple modes of mobility, technical progress, climate change, globalization are some of the key trends that drive the future of automotive industry.
Demand for tighter emission norms and design readiness to comply with BSVI emission norms
Downsizing of engine construction
Lighter engines with aluminum construction
Reducing assembly torque (sealing with lower force)
Advanced combustion modes involving very high combustion pressures
Growing usage of turbo-charged air aspiration and exhaust gas heat recovery
Longer maintenance free product life cycles
Dealing with challenges is the nature of work at Banco. The ever growing trends towards high power, high efficiency, light weighting, tighter emissions, and longer component life impose several challenges for our research and design engineers to design efficient engine sealing systems.
In order to design the most effective sealing solution, our designers use advanced CAD, FEA tools and a vast knowledge of polymer science. Our design engineers are able to choose and offer a choice of more than 25 grades of jointing materials, several grades of surface coatings, selective coatings, and a wide range of customized rubber compounds at Banco.
Our designers use advanced digital simulation tools for design verification such as:
Bead design optimization using FEA software ABAQUS
Thermal and pressure analysis using ABAQUS
Study of behavior of elastomer using CSR test rig
Study of behavior of soft gasket material based on load v/s deflection curves
Cover factor study for load distribution
Minimum clearance study using ABAQUS
With an objective of reducing time to market, Banco has established a dedicated prototype manufacturing shop with facilities such as:
ATOM knife cutting machine
CHIESA steel rule die cutting machine
Proto tool – CNC steel rule bending facility
Proto tool – steel die design and manufacturing support
Proto tool – Mould design and manufacturing support
Contour tracer & portable CMM for verification
Surface coating & partial coating setup
Comprehensive test capabilities at our R&D centre supports reliable product validation for newly developed products. Our test facilities include:
Minimum clearance – Lead pellet test
FUJI film test for pressure distribution
P(max.) testing – Nitrogen sealing test
Hydraulic Testing for media sealing
Air leak rate testing
Deep thermal shock test rig
Endurance test rig
Go-stop test
Full throttle run test
Comprehensive R&D capabilities together with vast experience of our engineers ensure that our innovation process is robust and keeps generating success stories for our customers.
Banco Group (Banco Products (India) Limited, Banco Gaskets (India) Limited, Banco New Energy Cooling Systems Limited) herein referred to as “Company”, “we”, “our” or “us”, is committed to protecting the privacy and personal data of individuals who interact with us through our website, business operations and related services.
We work with customers, automotive manufacturers, suppliers, business partners, employees, job applicants, contractors and other stakeholders. This Privacy Policy explains how we collect, use, disclose, store and protect personal data in connection with our business activities.
We process personal data in accordance with applicable Indian data protection laws, including the Digital Personal Data Protection Act, 2023, and the Digital Personal Data Protection Rules, 2025, to the extent applicable and in force. We also maintain information security and data protection practices aligned with applicable customer requirements and relevant TISAX assessment objectives.
This Privacy Policy applies to personal data collected through our website, enquiries, recruitment activities, business communications, customer and supplier interactions, and other related business processes.
It applies to customers, prospective customers, supplier and business partner representatives, website visitors, job applicants, contractors, visitors to our premises and other individuals whose personal data we process.
This Policy does not replace separate contractual confidentiality, information security or data processing obligations applicable to customer information, technical documentation, product designs, prototypes or other confidential business information.
Depending on the nature of our interaction with you, we may collect the following categories of personal data:
Where applicable, we may process visitor registration details, identity verification information, access records, photographs or CCTV footage for premises security, safety and access management.
We collect only personal data that is reasonably necessary for the relevant purpose, subject to applicable legal requirements.
We may obtain personal data directly from individuals through website forms, emails, telephone calls, business meetings, recruitment applications and other communications.
We may also receive personal data from the organisations with which individuals are associated, authorised representatives, recruitment agencies, service providers and other lawful sources, where necessary for our business activities.
Where personal data is received from another source, we handle it in accordance with applicable legal requirements and the purpose for which it was provided.
We process personal data for the following purposes, as applicable:
We do not use personal data for purposes unrelated to the original purpose of collection unless permitted by applicable law or supported by a valid legal basis.
We process personal data on the basis permitted under applicable law, including valid consent where required and the other lawful grounds recognised by the DPDP Act.
Where consent is required, we will provide appropriate information about the purpose of processing and seek consent through an appropriate method. Individuals may withdraw their consent in accordance with applicable law.
Where processing is necessary for a permitted legitimate use, compliance with a legal obligation or another lawful basis recognised under applicable law, we will process the data within the limits of that basis.
Withdrawal of consent does not affect the lawfulness of processing carried out before withdrawal. It may affect our ability to provide certain services or continue particular activities.
We may share personal data, where necessary and permitted by applicable law, with:
Where third parties process personal data on our behalf, we seek to establish appropriate contractual and organisational safeguards, including confidentiality and security obligations.
We do not sell personal data to third parties.
We recognise the importance of protecting personal data and confidential information against unauthorised access, disclosure, alteration, loss or misuse.
Depending on the nature of the information and associated risks, we implement appropriate technical and organisational measures, which may include:
Our information security practices are intended to support applicable legal obligations, contractual commitments and relevant customer security requirements.
We retain personal data only for as long as necessary to fulfil the purpose for which it was collected, comply with applicable legal and regulatory requirements, meet contractual obligations, resolve disputes or establish, exercise or defend legal claims.
Retention periods may vary depending on the category of data, the nature of the business relationship and applicable statutory or contractual requirements.
When personal data is no longer required, we take appropriate steps to delete it or otherwise dispose of it securely, subject to applicable legal retention obligations and any other lawful basis for continued retention.
Our website may use cookies or similar technologies to support website functionality, security, performance and user experience.
Where applicable, such technologies may collect technical information, including browser details, device information and website usage data.
You may be able to manage cookies through your browser settings. Disabling certain cookies may affect the functionality of parts of the website.
Where consent is required for particular cookies or tracking technologies, we will obtain consent in accordance with applicable requirements.
In the course of our business, personal data may be accessed or processed outside India where necessary for business operations, customer requirements or the use of authorised service providers.
Any such transfer will be subject to applicable Indian data protection laws, restrictions imposed by the Government of India and relevant contractual or regulatory requirements.
We take appropriate steps to ensure that personal data is handled with suitable safeguards when it is shared with authorised recipients in other jurisdictions.
Subject to applicable law, individuals may have the right to:
Requests will be handled in accordance with applicable law, verification requirements and any relevant legal or regulatory restrictions.
Individuals may raise questions, concerns or grievances relating to the processing of their personal data by contacting us using the details provided below.
We will review and address grievances within the timelines prescribed under applicable law and our applicable grievance redressal procedures.
Company Name: Banco Gaskets (India) Limited Email: sec@bancogaskets.com Postal Address: At/po: Ankhi, Taluka: Jambusar, Dist.: Bharuch – 392150 Subject Line: Privacy Policy / Personal Data Grievance
Where a complaint remains unresolved, individuals may pursue the remedies available under applicable law.
Our website and business activities are primarily intended for business and professional interactions. We do not knowingly seek to collect children’s personal data through our website unless necessary for a lawful and specific purpose.
Where the processing of children’s personal data is undertaken, we will comply with applicable requirements concerning children’s personal data, including parental or lawful guardian consent where required by law and any applicable restrictions.
Our website may contain links to third-party websites or services. Such websites operate under their own privacy policies and practices.
We are not responsible for the privacy practices, content or security of third-party websites. Individuals are encouraged to review the applicable privacy policies before providing personal data to those websites.
We may update this Privacy Policy from time to time to reflect changes in our business activities, website functionality, applicable legal requirements or data protection practices.
The revised Policy will be published on our website with an updated revision date. Where required by applicable law, we will provide additional notice or seek consent for changes in processing activities.
For questions regarding this Privacy Policy, the processing of personal data or the exercise of applicable privacy rights, please contact:
Email: info@bancogaskets.com Telephone: (0265) 2318100 Website: https://bancogaskets.com//
This Privacy Policy is effective from the date stated and applies subject to applicable laws and regulations.